ONGOING PROJECTS - BANGALORE > Lowe's > Nvidia > Bosch NHP > Dell 4 > Exotic Google > HP EC II > Molex > Oracle Global axis > Oracle OTH > Oracle OTP > VMware > PUNE > Mphasis PII ONGOING PROJECTS - BANGALORE > Lowe's > Nvidia > Bosch NHP > Dell 4 > Exotic Google > HP EC II > Molex > Oracle Global axis > Oracle OTH > Oracle OTP > VMware > PUNE > Mphasis PII

Water Mist System

Water mist systems are used for special applications in which it is decided that creating a heat absorbent vapor is the primary objective. This type of system is typically used where water damage may be a concern, or where water supplies are limited. NFPA 750(9) defines water mist as a water spray with a droplet size of "less than 1000 microns at the minimum operation pressure of the discharge nozzle." The droplet size can be controlled by the adjusting discharge pressure through a nozzle of a fixed orifice size. By creating a mist, and equal volume of water will create a larger total surface area exposed to the fire. The larger total surface area better facilitates the transfer of heat, thus allowing more water droplets to turn to steam more quickly. Steam, which absorbs more heat than water per unit time, will then more effectively cool the room, thus reducing the temperature of the flame.

Water mist systems can operate with the same functionality as deluge, wet pipe, dry pipe, or pre-action systems. The difference is that a water mist system uses a compressed gas as an atomizing medium, which is pumped through the sprinkler pipe. Systems can be applied using local application method or total flooding method, similar to Clean Agent Fire Protection Systems.